This paper reports on the influence of injection molding parameters and environmental testing on the permittivity of different thermoplastic materials used in MID technology. Permittivity and dielectric loss angle measurements up to frequencies of 3 GHz were performed by using suitable resonator structures on flat test substrates fabricated by LPKF-LDS® technology. It was found that the permittivity of LCP is only negligibly affected by injection molding parameters. Furthermore, during environmental tests the best performance was observed for LCP.
%0 Generic
%1 wolf2018investigation
%A Wolf, Marius
%A Janek, Florian
%A Meißner, Thomas
%A Wigger, Benedikt
%A Barth, Maximilian
%A Guenther, Thomas
%A Eberhardt, Wolfgang
%A Geneiß, Volker
%A Lueke, Tobias
%A Hedayat, Christian
%A Otto, Thomas Walter
%D 2018
%K from:thomasguenther
%T Investigation of Process Parameters on Permittivity for High-Frequency and Mixed-Signal Systems based on LDS Technology
%X This paper reports on the influence of injection molding parameters and environmental testing on the permittivity of different thermoplastic materials used in MID technology. Permittivity and dielectric loss angle measurements up to frequencies of 3 GHz were performed by using suitable resonator structures on flat test substrates fabricated by LPKF-LDS® technology. It was found that the permittivity of LCP is only negligibly affected by injection molding parameters. Furthermore, during environmental tests the best performance was observed for LCP.
@conference{wolf2018investigation,
abstract = {This paper reports on the influence of injection molding parameters and environmental testing on the permittivity of different thermoplastic materials used in MID technology. Permittivity and dielectric loss angle measurements up to frequencies of 3 GHz were performed by using suitable resonator structures on flat test substrates fabricated by LPKF-LDS® technology. It was found that the permittivity of LCP is only negligibly affected by injection molding parameters. Furthermore, during environmental tests the best performance was observed for LCP.},
added-at = {2022-07-25T13:46:07.000+0200},
author = {Wolf, Marius and Janek, Florian and Meißner, Thomas and Wigger, Benedikt and Barth, Maximilian and Guenther, Thomas and Eberhardt, Wolfgang and Geneiß, Volker and Lueke, Tobias and Hedayat, Christian and Otto, Thomas Walter},
biburl = {https://puma.ub.uni-stuttgart.de/bibtex/2459dc48ddfb1c87cf74cbdc9bf82a0fb/ifm},
eventdate = {September 25th - 26th},
eventtitle = {13th International Congress Molded Interconnect Devices},
interhash = {462c2a9e9c0cd60ceceb7ad07d578ab6},
intrahash = {459dc48ddfb1c87cf74cbdc9bf82a0fb},
keywords = {from:thomasguenther},
month = {9},
timestamp = {2022-07-25T11:46:07.000+0200},
title = {Investigation of Process Parameters on Permittivity for High-Frequency and Mixed-Signal Systems based on LDS Technology},
year = 2018
}
