Cellular Automata Simulation of Recrystallization at Hot Crack Surfaces. Mechanics, Resource and Diagnostics of Materials and Structures (MRDMS-2018), 2053:030044, AIP Publishing, Melville, NY, 2018. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Calculation of the Wöhler (S-N) curve using a two-scale model. Special issue of the International Conference on Structural Integrity and Durability 2017 (ICSI), 114:289-297, Elsevier, Amsterdam, 2018. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
On the Critical Resolved Shear Stress and Its Importance in the Fatigue Performance of Steels and Other Metals with Different Crystallographic Structures. Metals, (8)11:883, MDPI, 2018. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
An Investigation of the Influence of Initial Roughness on the Friction and Wear Behavior of Ground Surfaces. Materials, (11)2:237, MDPI, 2018. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
3D-printed multimaterial composites tailored for compliancy and strain recovery. Composite Structures, (184):11-17, Elsevier, 2018. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Fracture of functionally graded thermal barrier coating on a homogeneous substrate : models, methods, analysis. International Conference Applied Mathematics, Computational Science And Mechanics : Current Problems, 973:012017, IOP Publishing, Bristol, 2018. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Precipitation in a copper matrix modeled by ab initio calculations and atomistic kinetic Monte Carlo simulations. Physica status solidi. B, Basic solid state physics, (254)4:1600407, Wiley-VCH, 2017. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Molecular dynamics simulations of strengthening due to silver precipitates in copper matrix. Physica status solidi. B, Basic solid state physics, (254)5:1600479, Wiley-VCH, 2017. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Preface: special issue on computational micromechanics of materials. Meccanica, (51)2:269-270, Springer, 2016. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Laser ablation of Al-Ni alloys and multilayers. Applied physics. A, Materials science & processing, (122)5:500, Springer, 2016. [PUMA: mult ubs_10004 ubs_10008 ubs_20004 ubs_20014 ubs_30047 ubs_30142 ubs_40073 unibibliografie wos]
Low-Cycle Fatigue Properties of P92 Ferritic-Martensitic Steel at Elevated Temperature. Journal of materials engineering and performance, (25)4:1650-1662, Springer, 2016. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Residual Stress Analysis of Ceramic Coating by Laser Ablation and Digital Holography. Experimental mechanics, (56)5:683-701, Springer, 2016. [PUMA: mult ubs_10004 ubs_10007 ubs_20004 ubs_20011 ubs_30047 ubs_30102 ubs_30114 ubs_40073 ubs_40074 ubs_40175 unibibliografie wos]
Cyclic behaviour of 12% Cr ferritic-martensitic steel upon long-term on-site service in power plants. Fatigue & fracture of engineering materials & structures, (39)10:1179-1192, Wiley-Blackwell, 2016. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Modeling of Thermomechanical Fracture of Functionally Graded Materials with Respect to Multiple Crack Interaction. Physical mesomechanics, (20)3:241-249, Springer, 2017. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Molecular Dynamics Investigations of the Strengthening of Al-Cu Alloys during Thermal Ageing. Physical mesomechanics, (20)3:291-304, Springer, 2017. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
The Peculiarities of Structure Formation and Properties of Zirconia-Based Nanocomposites with Addition of Al2O3 and NiO. Nanoscale research letters, (12):125, Springer, 2017. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Modelling of overload effects on fatigue crack initiation in case of carbon steel. Special Issue: 16th International Conference on New Trends in Fatigue and Fracture (NT2F16), 40, 8:1182-1190, Wiley, Oxford, 2017. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Effect of Structural Heterogeneity of 17Mn1Si Steel on the Temperature Dependence of Impact Deformation and Fracture. Metals, (7)7:280, MDPI, 2017. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures. Materials science & engineering. C, Materials for biological applications, (60):339-347, Elsevier, 2016. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Hydrogen diffusion in doped and undoped alpha-Ti: An ab-initio investigation. International journal of hydrogen energy, (41)21:9108-9116, Elsevier, 2016. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures. Journal of the mechanical behavior of biomedical materials, (62):481-494, Elsevier, 2016. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
The relationships between deformation mechanisms and mechanical properties of additively manufactured porous biomaterials. Journal of the mechanical behavior of biomedical materials, (70):28-42, Elsevier, 2017. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Microstructure evolution in HR3C austenitic steel during long-term creep at 650 degrees C. Materials science & engineering. A, Structural materials: properties, microstructure and processing, (681):74-84, Elsevier, 2017. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Development and application of a microstructure-based approach to characterize and model failure initiation in DP steels using XFEM. Materials science & engineering. A, Structural materials: properties, microstructure and processing, (660):181-194, Elsevier, 2016. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Molecular dynamics simulations of tensile tests of Ni-, Cu-, Mg- and Ti-alloyed aluminium nanopolycrystals. In Vera Petrova, Siegfried Schmauder, Holm Altenbach, und Riszard Pyrz (Hrsg.), Articles from EUROMECH Colloquium 577 "Micromechanics of Metal Ceramic Composites", 116:32-43, Elsevier, Amsterdam, 2016. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
A study on the effect of grain dimension on the deformation of stent struts in tension, bending and unbending loading modes. International journal of mechanical sciences, (118):36-44, Elsevier, 2016. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Molecular dynamics simulations investigating consecutive nucleation, solidification and grain growth in a twelve-million-atom Fe-system. The 8th International Workshop on Modeling in Crystal Growth, 474:140-145, Elsevier, Amsterdam, 2017. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Precipitation, planar defects and dislocations in alloys : Simulations on Ni3Si and Ni3Al precipitates. Particle Methods in Natural Science and Engineering, 227, 14:1559-1574, Springer, Berlin, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Introducing a method of constructing realistic closed cell nano-porous iron crystals and MD simulations to investigate the influence of the system size on the stability and the mechanical properties. Proceedings of the 28th International Workshop on Computational Mechanics of Materials (IWCMM28), 166:150-154, Elsevier, Amsterdam, 2019. [PUMA: ubs_10004 ubs_10014 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Particle methods in natural science and engineering. European Physical Journal Special Topics, (227)14:1493-1499, Springer, 2019. [PUMA: mult oa ubs_10003 ubs_10004 ubs_10005 ubs_20003 ubs_20004 ubs_20005 ubs_20008 ubs_30039 ubs_30047 ubs_30058 ubs_30086 ubs_40065 ubs_40073 ubs_40084 ubs_40129 unibibliografie wos]
3D optical measurement and numerical simulation of the fracture behavior of Al6061 laser welded joints. Engineering Fracture Mechanics, (206):501-508, Elsevier Science, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Non-Contact Residual Stress Analysis Method With Displacement Measurements in the Nanometric Range by Laser Made Material Removal and SLM Based Beam Conditioning on Ceramic Coatings. In Luca Lusvarghi, und Robert Vaßen Lech Pawlowski (Hrsg.), 8th Rencontres Internationales de la Projection Thermique, (371)SI:14-19, Elsevier, 2019. [PUMA: mult ubs_10004 ubs_10007 ubs_20004 ubs_20011 ubs_30047 ubs_30102 ubs_30114 ubs_40073 ubs_40175 ubs_40333 unibibliografie wos]
Interplay of Structural, Electronic, and Transport Features in Copper Alloys. Journal of Alloys and Compounds, (777):619-626, Elsevier, 2019. [PUMA: mult ubs_10004 ubs_10008 ubs_20004 ubs_20014 ubs_30047 ubs_30134 ubs_30136 ubs_40073 ubs_40214 ubs_40216 unibibliografie wos]
Enhanced Strength and High Temperature Resistance of 25Cr20Ni ODS Austenitic Alloy Through Thermo-Mechanical Treatment and Addition of Mo. Fusion Engineering and Design, (138):175-182, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
AAM Special Issue of the International Conference on Structural Integrity and Durability, ICSID 2017, "Fatigue and Fracture at all Scales" : editorial. In Željko Božić, und Siegfried Schmauder (Hrsg.), Special Issue of the International Conference on Structural Integrity and Durability, 89, 5:789, Springer, Berlin, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Impurity influence on the oxygen adsorption on Ti3Al(0001) surface. Applied Surface Science, (487):898-906, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
A numerical study of plastic strain localization and fracture across multiple spatial scales in materials with metal-matrix composite coatings. Theoretical and Applied Fracture Mechanics, (101):342-355, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Gradient Theory for Crack Problems in Quasicrystals. European Journal of Mechanics : A-Solids, (77):103813, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Study of Deformation and Fracture of ZrO2+3%Y2O3 Ceramics by Wedge Splitting of a Chevron-Notched Specimen. Engineering Fracture Mechanics, (218):106573, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Mixed-Mode Fracture behavior of AM60 Magnesium Alloy using Two Parameter Fracture Mechanics. Engineering Fracture Mechanics, (218):106566, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Preface : Special Issue of the Journal Computational Materials Science on "Multiscale Materials Modeling". Computational Materials Science, (169):109096, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Low cycle fatigue properties and microstructure of P92 ferritic-martensitic steel at room temperature and 873 K. Materials Characterization, (157):109923, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Mixed FEM for quantum nanostructured solar cells. Composite Structures, (229):111460, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
XFEM Simulation of Fatigue Crack Growth in Aluminum Zirconia Reinforced Composites. International Journal for Multiscale Computational Engineering, (17)5:469-481, Begell, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 wos unibibliografie]
Virtual testing of plasticity effects on fatigue crack initiation. In Alphose Zingoni (Hrsg.), Advances in Engineering Materials, Structures and Systems : Innovations, Mechanics and Applications, 587-592, CRC Press, Taylor & Francis Group, Boca Raton, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Evaluation of Fracture Toughness of zrO2 - 3.0 mol%Y2O3 Ceramics Utilizing Wedge Splitting Loading of Double Cantilever Specimen with a Chevron Notch. Engineering Failure Analysis, (110):104409, Elsevier, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Recrystallization at Crack Surfaces as a Specific Fracture Mechanism at Elevated Temperatures-Cellular Automata Simulation. Physical Mesomechanics, (23)1:1-12, Elsevier, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
A comparative study on mechanical behavior and damage scenario of DP600 and DP980 steels. Mechanics of Materials, (143):103339, Elsevier, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Residual Stress Evaluation in Ceramic Coating Under Industrial Conditions by Digital Holography. IEEE Transactions on Industrial Informatics, (16)2:1102-1110, Elsevier, 2020. [PUMA: mult ubs_10004 ubs_10007 ubs_20004 ubs_20011 ubs_30047 ubs_30102 ubs_30114 ubs_40073 ubs_40175 ubs_40333 unibibliografie wos]
Solder Joint Lifetime Modeling Under Random Vibrational Load Collectives. JOM, (72)2:898-905, Springer Nature, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Experimental and Numerical Investigation of Hydrogen Embrittlement Effect on Microdamage Evolution of Advanced High-Strength Dual-Phase Steel. Metals and Materials International, (27)7:2276–2291, Springer Netherlands, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Microstructural Investigation of Plasma Sprayed Ceramic Coatings Using Peridynamics. Journal of Mechanics, (36)2:183-196, Cambridge Univ. Press, 2020. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Digital Image Correlation Tracking and Gurson-Tvergaard-Needleman Modeling of Crack Propagation on Steel S355. International Journal for Multiscale Computational Engineering, (18)1:31-40, Begell House, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
A physically based material model for the simulation of friction stir welding. Materials Testing, (62)6:603-611, Hanser, 2020. [PUMA: mult ubs_10004 ubs_10014 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
Revisit of antiplane shear problems for an interface crack : Does the stress intensity factor for the interface Mode III crack depend on the bimaterial modulus?. Engineering Fracture Mechanics, (216):106524, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
A lattice Monte Carlo model for solid particle erosion : An application to brittle fracture. Wear, (418):52-60, Elsevier, 2019. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
A numerical method for the generation of hierarchical Poisson Voronoi microstructures applied in micromechanical finite element simulations-part I : method. Computational Mechanics, (66)3:651–667, Springer, 2020. [PUMA: mult oa ubs_10004 ubs_10014 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
A theoretical model for the study of thermal fracture of functionally graded thermal barrier coatings with a system of edge and internal cracks. Theoretical and Applied Fracture Mechanics, (108):102605, Elsevier, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
A multiscale modeling on fracture and strength of graphene platelets reinforced epoxy. Engineering Fracture Mechanics, (235):107197, Elsevier Science, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Modelling the damping response of biomimetic foams based on pomelo fruit. Computational Materials Science, (183):109801, Elsevier, 2020. [PUMA: mult ubs_10004 ubs_10014 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Strength and damage of nanoplatelets reinforced polymer : A 3D finite element modeling and simulation. Composite Structures, (245):112337, Elsevier, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Crack analysis of nano-sized thermoelectric material structures. Engineering fracture mechanics, (234):107078, Elsevier Science, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Damage characterization of heat-treated titanium bio-alloy (Ti-6Al-4V) based on micromechanical modeling. Surface topography, (8)4:045016, IOP Publishing, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Ab initio investigation of Co/TaC interfaces. Journal of alloys and compounds, (853):156944, Elsevier, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Atomistic approach for the evaluation of direct flexoelectric coefficients in gradient theory. Ferroelectrics, (569)1:182-195, Taylor & Francis, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
First Principles Study of Bonding Mechanisms at the TiAl/TiO2 Interface. Metals, (10)10:1298, MDPI, 2020. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
3D Finite-Element Simulation of Wedge Splitting Test of Non-Standard Ceramic Double Cantilever Beam with Chevron Notch. Advanced engineering materials, (23)2:2000963, Wiley, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Increasing Fatigue Life of 09Mn2Si Steel by Helical Rolling : Theoretical-Experimental Study on Governing Role of Grain Boundaries. Materials, (13)20:4531, MDPI, 2020. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Brownian motion and Edagawa phasons. Journal of physics. Conference Series, (1458):012014, IOP Publishing, 2020. [PUMA: mult oa ubs_10004 ubs_10008 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Micromechanical modeling of damage mechanisms in dual-phase steel under different stress states. Engineering fracture mechanics, (243):107520, Elsevier, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
An Abaqus plugin for evaluation of the Auxetic structure performance. Engineering with computers, Springer Nature, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Increasing Low-Temperature Toughness of 09Mn2Si Steel through Lamellar Structuring by Helical Rolling. Metals, (11)2:352, MDPI, 2021. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Atomistic-scale modeling of nano-clay-filled shape memory polymers. Computational materials science, (188):110246, Elsevier, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Experimental 3D characterization and parametrization of an anisotropic constitutive law for a synthetic nonwoven. The journal of the Textile Institute, (113)4:647-656, Taylor & Francis, 2022. [PUMA: mult ubs_10004 ubs_10021 ubs_20004 ubs_20018 ubs_30047 ubs_30156 ubs_40073 unibibliografie wos]
In-situ investigation of dielectric properties and reaction kinetics of a glass-fiber-reinforced epoxy composite material using dielectric analysis. Polymer engineering & science, (61)6:1673-1684, Wiley, 2021. [PUMA: mult oa ubs_10004 ubs_20004 ubs_20005 ubs_30047 ubs_30054 ubs_40073 ubs_40079 unibibliografie wos]
Thermal fracture of functionally graded thermal barrier coatings with pre-existing edge cracks and multiple internal cracks imitating a curved interface. Continuum mechanics and thermodynamics, (33)4:1487-1503, Springer Nature, 2021. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Analysis of interacting cracks in functionally graded thermal barrier coatings. In Francesco Iacoviello, Aleksandar Sedmak, Liviu Marsavina, Bamber Blackman, Giuseppe Andrea Ferro, Valery Shlyannikov, Per Ståhle, Zhiliang Zhang, Pedro M. G. P. Moreira, Željko Božic, und Leslie Banks-Sills (Hrsg.), 1st Virtual European Conference on Fracture, 28:608-618, Elsevier, 2020. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Molecular Dynamics Simulation of High-Temperature Creep Behavior of Nickel Polycrystalline Nanopillars. Molecules, (26)9:2606, MDPI, 2021. [PUMA: mult oa ubs_10003 ubs_10004 ubs_20003 ubs_20004 ubs_30032 ubs_30047 ubs_40073 ubs_40294 unibibliografie wos]
In-Process Measurement and Numerical Determination of the Temperature in the Contact Zone During Single Lip Deep Hole Drilling. MM Science journal, (2021)SI:4556-4562, MM Science, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Additively Manufactured Gradient Porous Ti-6Al-4V Hip Replacement Implants Embedded with Cell-Laden Gelatin Methacryloyl Hydrogels. ACS applied materials & interfaces, (13)19:22110-22123, American Chemical Society, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Role of Intermediate Metal and Oxide Layers in Change of Adhesion Properties of TiAl/Al2O3 Interface. Physical mesomechanics, (24)5:523-532, Institute of Strength Physics and Materials Science, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Investigation of ceramics inelasticity of zirconium dioxide. In Victor. E. Panin, und Vasily M. Fomin (Hrsg.), Proceedings of the International Conference on Physical Mesomechanics : Materials with Multilevel Hierarchical Structure and Intelligent Manufacturing Technology, 2310, 1:020073, American Institute of Physics, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Peculiarities of the loading diagrams of ceramics ZrO2 + 3 mol % Y2O3 + 2 wt % Al2O3. In Victor. E. Panin, und Vasily M. Fomin (Hrsg.), Proceedings of the International Conference on Physical Mesomechanics : Materials with Multilevel Hierarchical Structure and Intelligent Manufacturing Technology, 2310, 1:020074, American Institute of Physics, 2020. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
A novel phase-field based cohesive zone model for modeling interfacial failure in composites. International journal for numerical methods in engineering, (122)23:7054-7077, Wiley-VCH, 2021. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Predicting the mechanical behavior of a polypropylene-based nonwoven using 3D microstructural simulation. The journal of the Textile Institute, (113)12:2609-2620, Taylor & Francis, 2022. [PUMA: mult ubs_10004 ubs_10021 ubs_20004 ubs_20018 ubs_30047 ubs_30156 ubs_40073 unibibliografie wos]
Influence of nanopowder sintering technology on crack resistance of tetragonal zirconium dioxide. Letters on materials, (11)4:409-415, RAS, Institute for Metals Superplasticity Problems, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 unibibliografie wos]
Sensor-Integrated Tool for Self-Optimizing Single-Lip Deep Hole Drilling. International journal of automation technology, (16)2:126-137, Fuji Technology Press, 2022. [PUMA: mult oa ubs_10004 ubs_10007 ubs_20004 ubs_20011 ubs_30047 ubs_30118 ubs_40073 ubs_40074 ubs_40310 unibibliografie wos]
Interaction of Oxygen with the Stable Ti5Si3 Surface. Metals, (12)3:492, MDPI, 2022. [PUMA: mult oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
Ab initio investigations of Fe(110)/graphene interfaces. Applied surface science, (598):153714, Elsevier, 2022. [PUMA: mult ubs_10004 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
Microstructural simulations on CrAlN HPPMS coatings. Surface and coatings technology, (447):128814, Elsevier, 2022. [PUMA: mult ubs_10004 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
Microstructural Modeling and Simulation of a Carbon Black-Based Conductive Polymer-A Template for the Virtual Design of a Composite Material. ACS omega, (7)33:28820–28830, American Chemical Society, 2022. [PUMA: mult ubs_10004 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
Nonlocal Damage Modeling of Solder Joint Failure under Thermal and Thermomechanical cyclic Loading. Proceedings of ASME 2021 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK2021), V001T06A003, the American Society of Mechanical Engineers, New York, NY, USA, 2021. [PUMA: ubs_10004 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
Hybrid Data-Driven Deep Learning Framework for Material Mechanical Properties Prediction with the Focus on Dual-Phase Steel Microstructures. Materials, (16)1:447, MDPI, 2023. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
3D deformation modeling of CrAlN coated tool steel compound during nanoindentation. Surface & coatings technology, (453):129148, Elsevier, 2023. [PUMA: mult ubs_10004 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
Physically-based modelling of the fatigue crack initiation life of stent components under cyclic loading employing the Finite-Element-Method (FEM). International journal of fatigue, (171)June:107594, Elsevier, 2023. [PUMA: mult ubs_10004 ubs_10021 ubs_20004 ubs_20018 ubs_30047 ubs_30156 ubs_40073 ubs_40074 unibibliografie wos]
Thermal Fracture of Functionally Graded Coatings with Systems of Cracks : Application of a Model Based on the Rule of Mixtures. Ceramics, (6)1:255-264, 2023. [PUMA: mult oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
Cycle Number Estimation Method on Fatigue Crack Initiation using Voronoi Tessellation and the Tanaka Mura Model. Journal of failure analysis and prevention, (23)2:548-555, Springer, 2023. [PUMA: mult ubs_10004 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
Investigation of Auxetic Structural Deformation Behavior of PBAT Polymers Using Process and Finite Element Simulation. Polymers, (15)14:3142, MDPI, 2023. [PUMA: f2023 gold mult oa oafonds ubs_10004 ubs_20004 ubs_20005 ubs_30047 ubs_30056 ubs_40073 ubs_40074 ubs_40081 unibibliografie wos]
FEM Simulations of Fatigue Crack Initiation in the Oligocrystalline Microstructure of Stents. Materials, (16)17:6003, MDPI, 2023. [PUMA: oa ubs_10004 ubs_20004 ubs_30047 ubs_40073 ubs_40074 unibibliografie wos]
Assessing Fatigue Life Cycles of Material X10CrMoVNb9-1 through a Combination of Experimental and Finite Element Analysis. Metals, (13)12:1947, MDPI, 2023. [PUMA: f2023 gold mult oa oafonds ubs_10004 ubs_10021 ubs_20004 ubs_20018 ubs_30047 ubs_30156 ubs_40073 ubs_40074 unibibliografie wos]