%0 Conference Paper %1 Prokop.1989b %A Prokop, Heinz-Jürgen %A Müller, Heinz Konrad %B Proceedings of the 12th International Conference on Fluid Sealing %C Cranfield (Cranfield, Bedford) %D 1989 %E Nau, B. S. %I British Hydromechanics Research Association %K H_Müller H_Prokop dichtungstechnik from:brunomueller ima %P 147–163 %T Film thickness, contact pressure and friction of PTFE rod seals %X A new method has been developed to determine the film thickness at outstroke and instroke of a reciprocating PTFE rod seal. For a particular seal the results allow to distinguish whether the quality of sealing is mainly attributed to a better wiping at the outstroke or, alternatively, to a beUer inward-pumping at the instroke. Theoretical results have been verified by experiments with thres seals of slightly different cross section. The static contact pressure of the PTFE seals was measured by a suitable test rig. In order to throw light upon a poor reproducability of leakage and friction of newly installed seals the run-in behaviour of bronze-filled PTFE seals has been deeply investigated. It was found that during run-in the sealing ability and the friction characteristics are subject to a typical change which can be attributed to a smoothing out of the PTFE-surface. %@ 9780947711702

@inproceedings{Prokop.1989b, abstract = {A new method has been developed to determine the film thickness at outstroke and instroke of a reciprocating PTFE rod seal. For a particular seal the results allow to distinguish whether the quality of sealing is mainly attributed to a better wiping at the outstroke or, alternatively, to a beUer inward-pumping at the instroke. Theoretical results have been verified by experiments with thres seals of slightly different cross section. The static contact pressure of the PTFE seals was measured by a suitable test rig. In order to throw light upon a poor reproducability of leakage and friction of newly installed seals the run-in behaviour of bronze-filled PTFE seals has been deeply investigated. It was found that during run-in the sealing ability and the friction characteristics are subject to a typical change which can be attributed to a smoothing out of the PTFE-surface.}, added-at = {2020-04-06T13:58:00.000+0200}, address = {Cranfield (Cranfield, Bedford)}, author = {Prokop, Heinz-Jürgen and Müller, Heinz Konrad}, biburl = {https://puma.ub.uni-stuttgart.de/bibtex/20a39b3613eef8643d78a7a58e4cbcb1e/samuelschwamm}, booktitle = {Proceedings of the 12th International Conference on Fluid Sealing}, editor = {Nau, B. S.}, eventdate = {10. - 12. May 1989}, eventtitle = {12th International Conference on Fluid Sealing}, interhash = {868f16cc32156e326dbeff0483bad554}, intrahash = {0a39b3613eef8643d78a7a58e4cbcb1e}, isbn = {9780947711702}, keywords = {H_Müller H_Prokop dichtungstechnik from:brunomueller ima}, note = 69, pages = {147–163}, publisher = {British Hydromechanics Research Association}, timestamp = {2020-04-06T12:05:12.000+0200}, title = {Film thickness, contact pressure and friction of PTFE rod seals}, venue = {Brighton, United Kingdom}, year = 1989 }