The development of highly customized technical devices is a decisive feature of technically complex setups, as frequently observed in quantum experiments. This paper describes the development and realization of an Yb-doped all-fiber amplifier system designed for such a special application, more specifically, an on-demand single-photon source based on four-wave mixing with rubidium Rydberg atoms. The laser is capable of generating bandwidth-limited configurable nanosecond pulses up to peak powers of >100 W and with pulse repetition frequencies (PRF) between 50 Hz and 1 MHz at selectable wavelengths (1008&\#x2013;1024 nm). Especially the amplification of the 1010 nm reference seed at the lower edge of the amplification range for Yb-based fibers is challenging and tends to produce amplified spontaneous emission (ASE) at higher wavelengths. To achieve high ASE suppression, particularly at low pulse repetition frequencies, two acousto-optical modulators (AOM) are utilized both for pulse picking and for temporal filtering. The synchronization between pulse repetition frequency and AOM driver signal allows pulse amplitude fluctuations to be kept below 1&\#x0025;, while ASE is suppressed by at least 85 dB (PRF&\#x2009;&\#x003D;&\#x2009;1 MHz) and 65 dB (PRF&\#x2009;&\#x003D;&\#x2009;1 kHz).
%0 Journal Article
%1 deVries:20
%A de Vries, Oliver
%A Plötner, Marco
%A Christaller, Florian
%A Zhang, Hao
%A Belz, Annika
%A Heinrich, Benjamin
%A Kübler, Harald
%A Löw, Robert
%A Pfau, Tilman
%A Walbaum, Till
%A Schreiber, Thomas
%A Tünnermann, Andreas
%D 2020
%I OSA
%J Opt. Express
%K QOpticsHotAtoms myown pi5
%N 12
%P 17362--17373
%R 10.1364/OE.394519
%T Highly customized 1010 nm, ns-pulsed Yb-doped fiber amplifier as a key tool for on-demand single-photon generation
%U http://www.opticsexpress.org/abstract.cfm?URI=oe-28-12-17362
%V 28
%X The development of highly customized technical devices is a decisive feature of technically complex setups, as frequently observed in quantum experiments. This paper describes the development and realization of an Yb-doped all-fiber amplifier system designed for such a special application, more specifically, an on-demand single-photon source based on four-wave mixing with rubidium Rydberg atoms. The laser is capable of generating bandwidth-limited configurable nanosecond pulses up to peak powers of >100 W and with pulse repetition frequencies (PRF) between 50 Hz and 1 MHz at selectable wavelengths (1008&\#x2013;1024 nm). Especially the amplification of the 1010 nm reference seed at the lower edge of the amplification range for Yb-based fibers is challenging and tends to produce amplified spontaneous emission (ASE) at higher wavelengths. To achieve high ASE suppression, particularly at low pulse repetition frequencies, two acousto-optical modulators (AOM) are utilized both for pulse picking and for temporal filtering. The synchronization between pulse repetition frequency and AOM driver signal allows pulse amplitude fluctuations to be kept below 1&\#x0025;, while ASE is suppressed by at least 85 dB (PRF&\#x2009;&\#x003D;&\#x2009;1 MHz) and 65 dB (PRF&\#x2009;&\#x003D;&\#x2009;1 kHz).
@article{deVries:20,
abstract = {The development of highly customized technical devices is a decisive feature of technically complex setups, as frequently observed in quantum experiments. This paper describes the development and realization of an Yb-doped all-fiber amplifier system designed for such a special application, more specifically, an on-demand single-photon source based on four-wave mixing with rubidium Rydberg atoms. The laser is capable of generating bandwidth-limited configurable nanosecond pulses up to peak powers of \>100 W and with pulse repetition frequencies (PRF) between 50 Hz and 1 MHz at selectable wavelengths (1008\&\#x2013;1024 nm). Especially the amplification of the 1010 nm reference seed at the lower edge of the amplification range for Yb-based fibers is challenging and tends to produce amplified spontaneous emission (ASE) at higher wavelengths. To achieve high ASE suppression, particularly at low pulse repetition frequencies, two acousto-optical modulators (AOM) are utilized both for pulse picking and for temporal filtering. The synchronization between pulse repetition frequency and AOM driver signal allows pulse amplitude fluctuations to be kept below 1\&\#x0025;, while ASE is suppressed by at least 85 dB (PRF\&\#x2009;\&\#x003D;\&\#x2009;1 MHz) and 65 dB (PRF\&\#x2009;\&\#x003D;\&\#x2009;1 kHz).},
added-at = {2020-07-17T12:20:10.000+0200},
author = {de Vries, Oliver and Pl\"{o}tner, Marco and Christaller, Florian and Zhang, Hao and Belz, Annika and Heinrich, Benjamin and K\"{u}bler, Harald and L\"{o}w, Robert and Pfau, Tilman and Walbaum, Till and Schreiber, Thomas and T\"{u}nnermann, Andreas},
biburl = {https://puma.ub.uni-stuttgart.de/bibtex/2c3f39a291f3311a3e22a19f56f0e3295/pi5},
doi = {10.1364/OE.394519},
interhash = {fa8aa2ccb82e05e34cfd0f8b5985c849},
intrahash = {c3f39a291f3311a3e22a19f56f0e3295},
journal = {Opt. Express},
keywords = {QOpticsHotAtoms myown pi5},
month = jun,
number = 12,
pages = {17362--17373},
publisher = {OSA},
timestamp = {2020-12-01T09:23:08.000+0100},
title = {Highly customized 1010 nm, ns-pulsed Yb-doped fiber amplifier as a key tool for on-demand single-photon generation},
url = {http://www.opticsexpress.org/abstract.cfm?URI=oe-28-12-17362},
volume = 28,
year = 2020
}
