Previous work has shown that floor slabs make up most of the material mass of building structures and are typically made of reinforced concrete. Considering the associated resource consumption and greenhouse gas emissions, new approaches are needed in order to reduce the built environment’s impact on the ongoing climate crisis. Various studies have demonstrated that adaptive building structures offer a potential solution for reducing material resource consumption and associated emissions. Adaptive structures have the ability to improve load-bearing performance by specifically reacting to external loads. This work applies the concept of adaptive structures to reinforced concrete slabs through the integration of fluidic actuators into the cross-section. The optimal integration of actuators in reinforced concrete slabs is a challenging interdisciplinary design problem that involves many parameters. In this work, actuation influence matrices are extended to slabs and used as an analysis and evaluation tool for deriving actuation concepts for adaptive slabs with integrated fluidic actuators. To define requirements for the actuator concept, a new procedure for the selection of actuation modes, actuator placement and the computation of actuation forces is developed. This method can also be employed to compute the required number of active elements for a given load case. The new method is highlighted in a case study of a 2 m × 2 m floor.
%0 Journal Article
%1 civileng3030047
%A Nitzlader, Markus
%A Steffen, Simon
%A Bosch, Matthias J.
%A Binz, Hansgeorg
%A Kreimeyer, Matthias
%A Blandini, Lucio
%D 2022
%J CivilEng
%K 2022 AT Artikel IKTD ILEK MPE PUK
%N 3
%P 809--831
%R 10.3390/civileng3030047
%T Designing Actuation Concepts for Adaptive Slabs with Integrated Fluidic Actuators Using Influence Matrices
%U https://www.mdpi.com/2673-4109/3/3/47
%V 3
%X Previous work has shown that floor slabs make up most of the material mass of building structures and are typically made of reinforced concrete. Considering the associated resource consumption and greenhouse gas emissions, new approaches are needed in order to reduce the built environment’s impact on the ongoing climate crisis. Various studies have demonstrated that adaptive building structures offer a potential solution for reducing material resource consumption and associated emissions. Adaptive structures have the ability to improve load-bearing performance by specifically reacting to external loads. This work applies the concept of adaptive structures to reinforced concrete slabs through the integration of fluidic actuators into the cross-section. The optimal integration of actuators in reinforced concrete slabs is a challenging interdisciplinary design problem that involves many parameters. In this work, actuation influence matrices are extended to slabs and used as an analysis and evaluation tool for deriving actuation concepts for adaptive slabs with integrated fluidic actuators. To define requirements for the actuator concept, a new procedure for the selection of actuation modes, actuator placement and the computation of actuation forces is developed. This method can also be employed to compute the required number of active elements for a given load case. The new method is highlighted in a case study of a 2 m × 2 m floor.
@article{civileng3030047,
abstract = {Previous work has shown that floor slabs make up most of the material mass of building structures and are typically made of reinforced concrete. Considering the associated resource consumption and greenhouse gas emissions, new approaches are needed in order to reduce the built environment’s impact on the ongoing climate crisis. Various studies have demonstrated that adaptive building structures offer a potential solution for reducing material resource consumption and associated emissions. Adaptive structures have the ability to improve load-bearing performance by specifically reacting to external loads. This work applies the concept of adaptive structures to reinforced concrete slabs through the integration of fluidic actuators into the cross-section. The optimal integration of actuators in reinforced concrete slabs is a challenging interdisciplinary design problem that involves many parameters. In this work, actuation influence matrices are extended to slabs and used as an analysis and evaluation tool for deriving actuation concepts for adaptive slabs with integrated fluidic actuators. To define requirements for the actuator concept, a new procedure for the selection of actuation modes, actuator placement and the computation of actuation forces is developed. This method can also be employed to compute the required number of active elements for a given load case. The new method is highlighted in a case study of a 2 m × 2 m floor.},
added-at = {2022-09-14T13:03:34.000+0200},
author = {Nitzlader, Markus and Steffen, Simon and Bosch, Matthias J. and Binz, Hansgeorg and Kreimeyer, Matthias and Blandini, Lucio},
biburl = {https://puma.ub.uni-stuttgart.de/bibtex/256b6ff83abc8d2ea51688753e3d057d0/iktd_group},
doi = {10.3390/civileng3030047},
interhash = {aaaefcc2e821880d56d70a485ac1372d},
intrahash = {56b6ff83abc8d2ea51688753e3d057d0},
issn = {2673-4109},
journal = {CivilEng},
keywords = {2022 AT Artikel IKTD ILEK MPE PUK},
language = {English},
number = 3,
pages = {809--831},
timestamp = {2022-12-05T08:13:52.000+0100},
title = {Designing Actuation Concepts for Adaptive Slabs with Integrated Fluidic Actuators Using Influence Matrices},
url = {https://www.mdpi.com/2673-4109/3/3/47},
volume = 3,
year = 2022
}
